The Kidde i12060 is an AC/DC smoke alarm with 120V power and 9V backup, featuring ionization sensing and SMART HUSHTM control. Part of the i12000 series, it offers reliable fire detection with advanced features for home safety.
1.1 Overview of the Kidde i12060 Model
The Kidde i12060 is a hardwired smoke alarm designed for residential use, operating on a 120V AC power source with a 9V battery backup for continuous protection during power outages. It utilizes ionization sensing technology, which is effective at detecting invisible particles produced by flaming fires. This model is part of Kidde’s i12000 series, known for its reliability and advanced safety features. The i12060 also features SMART HUSHTM control, allowing users to temporarily silence nuisance alarms without disabling the device. It is compatible with other Kidde smoke and carbon monoxide detectors, enabling a interconnected home safety system. With its durable design and user-friendly interface, the i12060 is a popular choice for homeowners seeking comprehensive fire detection capabilities.
1.2 Key Features of the Kidde i12060
The Kidde i12060 smoke alarm boasts several standout features, including its AC/DC power with a 9V battery backup, ensuring continuous protection even during power outages. It employs ionization sensing technology, which excels at detecting invisible particles from flaming fires. The unit also includes SMART HUSHTM control, allowing users to silence nuisance alarms temporarily without disabling the device. Additionally, the i12060 supports interconnectivity with up to 24 Kidde devices, enabling a unified home safety system. Its durable design and easy-to-install mounting bracket make it a practical choice for homeowners. The alarm provides clear audible and visual indicators, ensuring prompt alerts in case of potential threats. These features collectively make the Kidde i12060 a robust and reliable option for enhancing home fire safety.
1.3 Importance of Reading the Manual
Reading the Kidde i12060 manual is essential for proper installation, operation, and maintenance of the smoke alarm. The manual provides detailed instructions on recommended locations, wiring, and battery installation, ensuring optimal performance and safety. It also explains advanced features like SMART HUSHTM control and interconnectivity with other devices. Understanding these features through the manual helps users maximize the alarm’s effectiveness. Additionally, the manual includes troubleshooting tips for common issues like chirping or false alarms, saving time and reducing frustration. By following the guidelines, users can ensure compliance with local fire safety codes and maintain their home’s protection. The manual serves as a comprehensive guide, making it a crucial resource for both installation and ongoing use of the Kidde i12060 smoke alarm.
Installation Instructions
Proper installation of the Kidde i12060 smoke alarm ensures reliable performance and safety. Follow the manual’s step-by-step guide for mounting, wiring, and battery installation to guarantee correct setup and functionality.
2.1 Recommended Locations for Installation
For optimal protection, install the Kidde i12060 smoke alarm on every level of your home, inside each bedroom, and outside sleeping areas. Place alarms at least 10 feet away from cooking appliances to minimize false alarms; Avoid installation in bathrooms, garages, or areas with high humidity. Install on the ceiling or high on walls, as smoke rises. In large homes, consider interconnected systems for comprehensive coverage. Ensure compliance with local fire codes and refer to the manual for specific placement guidelines to ensure maximum effectiveness and safety.
2.2 Mounting the Smoke Alarm
Mount the Kidde i12060 smoke alarm on a ceiling or high on a wall, ensuring it is secure and level. Begin by turning off the power supply to the circuit at the electrical panel. Locate the ideal spot, typically near the center of the room, and use the provided mounting bracket to mark the screw holes. Drill pilot holes if necessary and screw the bracket into place. For hardwired models, connect the wires to the terminals as specified in the manual. Finally, attach the smoke alarm to the bracket and ensure it clicks firmly into place. Test the alarm to confirm proper installation and functionality. Always follow the manufacturer’s instructions for safe and correct mounting.
2.3 Wiring and Electrical Connections
Before wiring, ensure the power is off at the circuit breaker. Connect the smoke alarm to a dedicated 120V AC circuit. Use the provided wiring harness to attach the alarm to the electrical system. Connect the black (live) wire to the brass terminal, the white (neutral) wire to the silver terminal, and the copper (ground) wire to the green terminal. For interconnectivity, use the red wire to connect multiple units. Ensure all connections are secure and meet local electrical codes. After wiring, turn the power back on and test the alarm by pressing the test button. Proper wiring ensures reliable performance and safety. Refer to the manual for detailed diagrams and specific instructions.
2.4 Battery Installation and Backup
The Kidde i12060 smoke alarm requires a 9V battery for backup power during electrical outages. To install the battery, open the unit by twisting it counterclockwise. Insert the battery into the compartment, ensuring the terminals align correctly. Close the unit securely. The battery provides continuous protection even when the mains power is off. It is essential to use a high-quality 9V battery and avoid damaged or expired ones. The alarm will chirp periodically when the battery is low, indicating it needs replacement. Replace the battery annually or as indicated by the low-battery warning. Proper battery installation ensures uninterrupted fire safety and reliable performance of the smoke alarm. Always test the alarm after battery replacement to confirm it is functioning correctly.
Features and Technology
The Kidde i12060 smoke alarm features advanced ionization sensing, AC/DC power with 9V battery backup, and SMART HUSHTM control for false alarm reduction, ensuring reliable fire detection and user convenience.
3.1 Ionization Sensing Technology
The Kidde i12060 employs ionization sensing technology, which detects invisible fire particles quickly. This technology is effective for fast-flaming fires, ensuring early detection and providing crucial seconds for escape. The sensor uses a small amount of radioactive material to ionize the air inside the chamber, creating a current. When smoke enters, it disrupts this current, triggering the alarm. Ionization sensors are particularly responsive to fires with high flames and little smoke, making them ideal for areas like kitchens or living rooms. This feature enhances home safety by offering reliable and prompt alerts in emergency situations, ensuring the i12060 is a trusted choice for fire detection.
3.2 AC/DC Power with Battery Backup
The Kidde i12060 operates on a 120V AC power source with a 9V battery backup, ensuring continuous operation even during power outages. This dual-power system provides reliable fire detection and peace of mind. The AC power connects to household wiring for consistent functionality, while the battery serves as an emergency backup. The battery backup ensures the alarm remains active when the main power supply is disrupted, maintaining safety. This feature is especially critical in areas prone to power failures. The combination of AC/DC power with battery backup enhances reliability and ensures the smoke alarm functions optimally in all conditions, providing consistent protection for your home and family.
3.3 Interconnectivity with Other Devices
The Kidde i12060 supports interconnectivity with up to 24 compatible devices, enabling a unified safety network. This feature allows multiple smoke alarms and accessories to communicate, ensuring all units activate simultaneously upon detection. Interconnectivity enhances home safety by providing immediate alerts throughout the household. The i12060 can connect with other Kidde models, such as the i12040, i12060A, and i4618 series, creating a comprehensive detection system. For proper setup, refer to the user manual for compatible models and wiring instructions. This interconnected system ensures consistent and reliable performance, offering peace of mind for homeowners. The interconnectivity feature is designed to meet NFPA standards, ensuring optimal functionality and compliance with safety regulations.
3.4 SMART HUSHTM Control
The Kidde i12060 features SMART HUSHTM Control, a technology designed to reduce false alarms while maintaining reliable detection. This system allows users to temporarily silence nuisance alarms, such as those caused by cooking smoke, without disabling the device. The SMART HUSHTM feature ensures the alarm remains active and ready to detect actual threats. To activate this feature, press the test/silence button on the unit. The alarm will silence for approximately 10 minutes, resuming normal operation afterward. This function is ideal for minimizing false alarms in busy households while maintaining safety standards. Always ensure the alarm is not silenced during actual emergencies to avoid potential risks. The SMART HUSHTM Control is a convenient and practical solution for managing false alarms effectively.
Maintenance and Troubleshooting
Regular cleaning and battery checks ensure optimal performance. Troubleshooting common issues like false alarms or chirping can be resolved by replacing batteries or resetting the unit.
4.1 Cleaning the Smoke Alarm
Cleaning the Kidde i12060 smoke alarm is essential for maintaining its performance. Dust and debris can interfere with its sensing capabilities, leading to false alarms or reduced sensitivity. Use a soft, dry cloth or a vacuum cleaner with a gentle brush attachment to remove dust from the exterior and interior of the unit. Avoid using chemicals, water, or abrasive materials, as they may damage the sensor or housing. For stubborn particles, a can of compressed air can be used, but ensure the alarm is turned off before cleaning; Regular cleaning every 1-2 months is recommended, especially in areas prone to dust or smoke. Proper maintenance ensures the alarm functions accurately and provides reliable fire detection for your home.
4.2 Replacing the Battery
The Kidde i12060 smoke alarm is equipped with a 9V battery backup to ensure operation during power outages. To replace the battery, first, turn off the power to the alarm at the circuit breaker. Remove the smoke alarm from its mounting bracket by twisting it counterclockwise. Open the battery compartment, located on the back or side of the unit, and discard the old battery. Insert a new 9V battery, ensuring proper orientation. Close the compartment and reinstall the alarm on the bracket. Turn the power back on and test the alarm by pressing the test button to confirm it works. Replace the battery annually or when the low-battery chirp sounds, even if the unit is hardwired, to maintain reliability and safety.
4.3 Troubleshooting Common Issues
If the Kidde i12060 smoke alarm chirps intermittently, it may indicate a low battery. Replace the 9V battery with a new one and test the alarm. For continuous chirping, check for proper installation and ensure no obstructions block the sensor. If the alarm is connected to an AC power supply, verify that the wiring is secure and undamaged. Dust or debris in the sensor chamber can cause false alarms; clean the unit regularly using a vacuum or soft brush. If issues persist after cleaning, reset the alarm by removing the battery and pressing the test button for 10 seconds. Consult the user manual for detailed troubleshooting steps or contact Kidde customer support if problems continue. Regular maintenance ensures optimal performance and safety.
4.4 Resetting the Smoke Alarm
To reset the Kidde i12060 smoke alarm, first, ensure it is disconnected from its power source. For battery-powered models, remove the battery and press the test button for 10 seconds to discharge any residual power. For hardwired units, turn off the circuit breaker controlling the alarm and wait 10 seconds before restoring power. Reinstall the battery or restore power and test the alarm by pressing the test button to ensure it functions correctly. If the alarm was part of an interconnected system, resetting one unit may require resetting all connected devices. Regular resets can help resolve issues like false alarms or intermittent chirping. Always refer to the user manual for specific instructions tailored to your model;
Certification and Compliance
The Kidde i12060 smoke alarm meets regulatory standards and holds necessary certifications, ensuring compliance with local fire safety codes for safe and reliable operation in residential settings.
5.1 Regulatory Standards and Certifications
The Kidde i12060 smoke alarm is certified to meet rigorous safety standards, ensuring reliability and compliance with fire safety regulations. It adheres to UL (Underwriters Laboratories) standards, a trusted mark of safety, and is designed to comply with local and national fire codes. The device has undergone extensive testing to ensure it performs effectively in various conditions, providing homeowners with a reliable smoke detection system. Compliance with these standards guarantees that the alarm operates consistently and accurately, offering peace of mind for users. By meeting these certifications, the Kidde i12060 demonstrates its commitment to safety and quality, making it a trusted choice for residential smoke detection.
5.2 Compliance with Local Fire Safety Codes
The Kidde i12060 smoke alarm is designed to comply with local fire safety codes, ensuring it meets the specific requirements of your area. Proper installation and placement, as outlined in the manual, are crucial for adherence to these codes. Local fire safety codes often mandate the use of smoke alarms in residential properties, and the Kidde i12060 is engineered to fulfill these obligations. By following the installation instructions and maintaining the device, homeowners can ensure compliance with fire safety regulations. This compliance not only enhances safety but also helps avoid potential legal issues related to fire code violations. Always consult local authorities for specific requirements and verify that the alarm meets all necessary standards. Proper installation and maintenance are essential for both safety and compliance.
Interconnectivity and Multiple Station Setup
The Kidde i12060 supports interconnectivity with up to 24 compatible devices, enabling a unified safety system. It works seamlessly with other Kidde models like i12040 and i4618, providing whole-home protection through interconnected alarms;
6.1 How Interconnectivity Works
Interconnectivity allows the Kidde i12060 to communicate with up to 24 compatible devices, ensuring a unified safety network. When one alarm detects smoke, all interconnected units sound, providing early warning throughout the home. This feature enhances safety by ensuring no area is left unmonitored. The system uses wire-in connections to link smoke alarms and compatible devices, creating a seamless communication network. Compatible models include the i12040, i12060A, and i4618. The interconnect system must not exceed NFPA guidelines, ensuring reliable performance. This setup is ideal for large homes or multi-story buildings, offering comprehensive protection. By connecting multiple alarms, the Kidde i12060 ensures that fire detection is swift and widespread, maximizing safety for all occupants. Proper installation and wiring are essential for optimal functionality.
6.2 Compatible Models for Interconnection
The Kidde i12060 can interconnect with specific models to create a unified safety system. Compatible models include the i12040, i12060A, i12080, and i4618. These alarms share similar communication protocols, ensuring seamless integration. Users must refer to the user guide for a full list of compatible devices. Interconnecting with non-compatible models may cause system malfunctions. The i12060 also works with certain carbon monoxide detectors, enhancing home safety. Proper pairing ensures all devices function together, providing comprehensive protection. Always follow the manufacturer’s guidelines for interconnectivity to maintain system reliability and effectiveness. This compatibility feature allows for a tailored safety network, meeting the unique needs of any home configuration. Consult the manual for detailed compatibility information before setting up your interconnected system.
6.3 Setting Up a Multiple Station System
Setting up a multiple station system with the Kidde i12060 allows for interconnected alarms to enhance safety. Connect up to 24 compatible devices, ensuring all alarms sound simultaneously. Follow the manual’s wiring instructions to link the alarms properly. Install alarms in bedrooms, hallways, and living areas for comprehensive coverage. Use the interconnect feature to ensure all detectors communicate seamlessly. Refer to the user guide for specific wiring and installation steps to avoid malfunctions. This setup provides whole-home protection, alerting everyone to potential dangers instantly. Always test the system after installation to confirm interconnectivity. Proper setup ensures maximum safety and reliability, meeting fire safety standards effectively.
6.4 Troubleshooting Interconnectivity Issues
Interconnectivity issues with the Kidde i12060 can arise due to wiring problems or incompatible models. Ensure all alarms are correctly wired and powered. Verify compatibility by checking the user manual. If alarms fail to connect, reset each unit and test interconnectivity. Address power interruptions, as they can disrupt communication. Ensure all devices are interconnected properly, following the manual’s instructions. If issues persist, refer to the troubleshooting section for detailed solutions. Proper setup ensures seamless communication and reliable safety. Always test the system after troubleshooting to confirm functionality.
Warranty and Customer Support
The Kidde i12060 is backed by a limited warranty, covering defects in material and workmanship. For assistance, contact Kidde’s customer support via phone or their official website.
7.1 Warranty Information
The Kidde i12060 smoke alarm is covered by a limited warranty that protects against defects in material and workmanship. The warranty period typically lasts for several years from the date of purchase, depending on the model and region. To ensure coverage, users must register the product and retain the original purchase receipt. The warranty does not cover damage caused by misuse, improper installation, or unauthorized modifications. For specific details, including warranty duration and exclusions, refer to the official Kidde website or the manual provided with the device. Proper registration and adherence to installation guidelines are essential to maintain warranty validity and ensure optimal performance of the smoke alarm.
7.2 Contacting Kidde Customer Support
For assistance with the Kidde i12060 smoke alarm, customers can contact Kidde’s customer support team through various channels. Visit the official Kidde website at www.kidde.com to access contact information, including phone numbers and email support. Many issues can be resolved by referring to the user manual or troubleshooting guides available on their website. For urgent inquiries, calling their customer service hotline is recommended. Ensure to have the model number (i12060) and purchase details ready for faster assistance. Kidde also offers live chat support on their website for convenience. Additionally, users can find helpful resources, such as FAQs and product manuals, in the support section. Reaching out to customer support is essential for resolving warranty claims, technical issues, or installation-related questions.
The Kidde i12060 smoke alarm is a reliable, feature-rich device designed for home safety, offering advanced detection and peace of mind with its ionization technology and battery backup.
8.1 Summary of Key Points
The Kidde i12060 smoke alarm is a high-performing, AC/DC-powered device with 120V operation and 9V battery backup, designed for reliable fire detection. It utilizes ionization sensing technology to detect invisible fire particles and features SMART HUSHTM control for reducing false alarms. The alarm is part of the i12000 series, known for its advanced safety features and user-friendly design. With a strong focus on home safety, the i12060 is highly rated for its effectiveness and ease of installation. It is compatible with multiple station setups and ensures compliance with regulatory standards, making it a trusted choice for protecting homes and families from fire hazards. The device also comes with clear installation and maintenance guidelines, ensuring optimal performance over time.
8.2 Final Tips for Safe Installation and Use
For safe installation and use of the Kidde i12060, ensure proper placement in hallways and bedrooms, adhering to local fire codes. Always follow the manual’s instructions for wiring and battery installation. Test the alarm monthly and clean it regularly to prevent dust buildup. Replace the battery annually, even if it’s a backup, to maintain reliability. Check the alarm’s expiration date and replace it every 10 years. Utilize the SMART HUSHTM feature to minimize false alarms. Interconnect multiple units for whole-house protection and ensure all alarms are compatible. Reset the alarm correctly after addressing issues to avoid recurring false alarms. By following these guidelines, you can ensure optimal performance and safety for your home and family.